Raised toilet seats are vital to the elderly. Purchasing one depends largely on what has been instructed by the doctor. Toilet seats are available in different forms and each is specially designed with a distinctive purpose. Buyers should, therefore, consult with their physicians just before heading to the any home depot.
Being able to identify the right seat gives an elderly convenience and comfort. It will never be so hard to find a store with the item specified by the doctor for there are tons in the city having such. Installing this, however, is a pretty tricky process but no one is required to hire a professional installer to do it. The purchase normally comes with easy-to-understand instructions and if carefully followed, the project will be finished up as expected. For those installing a bubble-type raised seat, here is how it is done easily.
First is to have the seat and the toilet cover lifted. This must be done for both seat and lid to be positioned appropriately upright. It is quite impossible to carry on with the process having this undone for it is important to open the bowl later.
The seat will be positioned at the tall end by the inner ring and rear of the bowl found at the opening. To have the bowl installed, elevated seat much be pushed down till it is ascertained having been put securely in place. But since this is never intended for a permanent use, one must check the physician every now and then for this may compromise user safety going beyond suggested date of use.
Raised toilet seats that have adjustable knobs will be harder to install. But then again, there is no need to pay for an installer for this to be done right. The same thing will be done during the process, though. The lid and seat must be lifted for the same reason.
Adjustments must only be made the moment the cover is already raised. Once done, adjustment knobs must be turned in a leftward direction in order to loosen the adjustment bracket. Doing this gets the seat to be easier to fit into the bowl.
This has to be done continuously without an increase of force of course until it fits perfectly. After, the toilet is to be placed in the bowl rim while hooking its rear flanges located under the edge. The elevated unit must sit flat on the rim. Also, the knob must be ensured fixed at the front end.
Having this secured on the rim, this must be pushed hard using the hands for the new seat to be placed at the center. Adjustment knob must then be turned in the opposite direction, clockwise, for it to tighten. One should continue turning until he is able to feel resistance of the knob.
And if the topmost end of raised toilet seats eventually hit the cover, these need to be removed immediately. Specific instructions of installation and adjustments have been identified by the American Red Cross for safety. But if installation is indeed burdensome, it is a lot wiser to call for help from a pro.
Being able to identify the right seat gives an elderly convenience and comfort. It will never be so hard to find a store with the item specified by the doctor for there are tons in the city having such. Installing this, however, is a pretty tricky process but no one is required to hire a professional installer to do it. The purchase normally comes with easy-to-understand instructions and if carefully followed, the project will be finished up as expected. For those installing a bubble-type raised seat, here is how it is done easily.
First is to have the seat and the toilet cover lifted. This must be done for both seat and lid to be positioned appropriately upright. It is quite impossible to carry on with the process having this undone for it is important to open the bowl later.
The seat will be positioned at the tall end by the inner ring and rear of the bowl found at the opening. To have the bowl installed, elevated seat much be pushed down till it is ascertained having been put securely in place. But since this is never intended for a permanent use, one must check the physician every now and then for this may compromise user safety going beyond suggested date of use.
Raised toilet seats that have adjustable knobs will be harder to install. But then again, there is no need to pay for an installer for this to be done right. The same thing will be done during the process, though. The lid and seat must be lifted for the same reason.
Adjustments must only be made the moment the cover is already raised. Once done, adjustment knobs must be turned in a leftward direction in order to loosen the adjustment bracket. Doing this gets the seat to be easier to fit into the bowl.
This has to be done continuously without an increase of force of course until it fits perfectly. After, the toilet is to be placed in the bowl rim while hooking its rear flanges located under the edge. The elevated unit must sit flat on the rim. Also, the knob must be ensured fixed at the front end.
Having this secured on the rim, this must be pushed hard using the hands for the new seat to be placed at the center. Adjustment knob must then be turned in the opposite direction, clockwise, for it to tighten. One should continue turning until he is able to feel resistance of the knob.
And if the topmost end of raised toilet seats eventually hit the cover, these need to be removed immediately. Specific instructions of installation and adjustments have been identified by the American Red Cross for safety. But if installation is indeed burdensome, it is a lot wiser to call for help from a pro.
About the Author:
You can visit the website www.apexmedicalstore.com for more helpful information about An Easy Way To Install Raised Toilet Seats
No comments:
Post a Comment
Gimme your 2 cents!