When you are not able to repair a great "unbootable" laptop hard disk, you are able to save the data it contains to your desktop computer using the "slave drive" treatment method. In the event the drive with the laptop haven't broken straight down mechanically, and this disk is usually "readable" - you will be able to conserve the important data on your fiber channel hd .
Separate the battery in the laptop. Following, take out the drive carefully, taking care of the holds that preserve it. Switch off the laptop computer. Remove all connections of cable in the back. Additionally, remove edge cover of the chassis.
Get the cable which connects on the 15000 scsi . Examine this connection. You will see another plastic connector inside. Connect a laptop to your IDE adaptor. Set adapter to figure as "Slave drive". Connect hard disk of laptop on the last terminate of adapter. After attaching the hard drive to the PC, put a further cable into the available plug-ins on motherboard.
Plug go on end with SATA cable inside drive with laptop. Sneaker the pc after connecting rear cables. Using that mouse, right press 'Start' and be able to select Examine. Check for any laptop's drive in the listings. It appears by means of new propels. Copy any documents in the drive of laptop within a folder on the PC. Pull the plug on desktop pc and take off all rear cables all over again. Also, unplug the hard drive of netbook from usb case of hard drive and replace side cover on computer's desktop.
Now plug in every one rear wires and cables and boot it all over again. Remove this adapter in the drive of laptop, replace that old one which includes a new an individual, and reinstall main system on hard disk. Copy the saved file types from computer onto a USB get for transferring them oh no- the new or mended laptop drive.
Separate the battery in the laptop. Following, take out the drive carefully, taking care of the holds that preserve it. Switch off the laptop computer. Remove all connections of cable in the back. Additionally, remove edge cover of the chassis.
Get the cable which connects on the 15000 scsi . Examine this connection. You will see another plastic connector inside. Connect a laptop to your IDE adaptor. Set adapter to figure as "Slave drive". Connect hard disk of laptop on the last terminate of adapter. After attaching the hard drive to the PC, put a further cable into the available plug-ins on motherboard.
Plug go on end with SATA cable inside drive with laptop. Sneaker the pc after connecting rear cables. Using that mouse, right press 'Start' and be able to select Examine. Check for any laptop's drive in the listings. It appears by means of new propels. Copy any documents in the drive of laptop within a folder on the PC. Pull the plug on desktop pc and take off all rear cables all over again. Also, unplug the hard drive of netbook from usb case of hard drive and replace side cover on computer's desktop.
Now plug in every one rear wires and cables and boot it all over again. Remove this adapter in the drive of laptop, replace that old one which includes a new an individual, and reinstall main system on hard disk. Copy the saved file types from computer onto a USB get for transferring them oh no- the new or mended laptop drive.
About the Author:
If you are tired of finding a good scsi 80pin hard , check out the best services of scsi u320 80 pin
No comments:
Post a Comment
Gimme your 2 cents!